We are committed to continuously upgrade our knowledge & skill to improve the efficiency of our organization. We promise to deliver quality products & services at the most reasonable price at the right time with proper Finishing, Painting, Marking & Documents. We also take proper safety measures during all manufacturing activities while also maintaining our responsibility towards the environment. Our quality has been widely appreciated by our clients and various TPI agencies. At TESHI quality & safety is our responsibility & habit.

Teshi Engineers & Sales Promoters (P) Ltd is regularly certified by TUV to the ISO 9001:2015 standard for the overall management of the work process.

We have various product certificates that allow us to offer high quality for the most specific needs, such as being a qualified supplier of PED 97/23/EC, AD 2000 MERKBLATT W0 by “TUV Nord”.

Our real strength lies in quality control. We have a comprehensive quality assurance facility to check every single product that leaves the factory. The company has the latest manufacturing and testing facilities of world class standard and equally qualified and experienced personnel to carry out inspection at various levels.

Chemical Testing

As per the code/standard requirement chemical analysis is carried out on spectrometer of Spectro max (Germany) in our own laboratory.

Mechanical Test

Tensile test, hardness test, flanging, flattening, reverse bending, reverse flattening are done regularly as per the code and standards.

Hydro Test

100% water tests on a hydraulic test bench are carried out with a high pressure pump on all pipes and hoses according to regulations and standards.

Visual Inspection

Surface finish, dimensions, edge and length checks are carried out on 100% of the pipes. The inspection ensures the straightness of the pipes according to ASTM standard.

Air Under Water Test/ Pneumatic Test

Even though this is an additional requirement, the company makes it a point to test all pipes leaving the factory under compressed air to detect any leaks and ensure that there are no incomplete welds.

Eddy Current Testing

This is carried out to detect surface defects, etc. This inspection is carried out using the Techno four flaws marking system on the entire length of the pipes as per the code / standard with hole or notch standard, with automatic separation system.

Microstructure Examination / Analysis Software

Teshi has the possibility to measure the ferrite content. The microscope helps to check the grain structure of tubes after the annealing process. The above microscope is equipped with analysis software that displays the grain structure automatically without manual intervention. The microstructure examination is carried out according to the code / standard.

Hardness Tester

The hardness tester is used to test the surface hardness of the material using the Rockwell-Brinnel scale on the 30T scale. This test is carried out in accordance with the regulations and standards.

Corrosion Testing

To determine the susceptibility of the material to intergranular corrosion attack or to measure the corrosion rate, IGC tests are carried out in accordance with standards “A”, “B”, “C” or “E” in our fully equipped in-house laboratory.

Chemical Laboratory

Teshi has a fully equipped laboratory to check chloride content in water, daily pickling, passivation, coating and soap bath analysis.

Radiography Testing

The Company can provide X-ray testing facilities with an X-ray machine.

Ultrasonic Testing

Teshi has an offline ultrasonic testing system with a water emulsion system with four probes and a microprocessor unit to detect special process sequences. In addition, the system can mark the detector by spraying.