"KBS" GRID FLEX HI-TORQUE COUPLING
|
 |
"KBS" Grid coupling is the most simplest, cost effective alternative to gear couplings,
"KBS" design eliminates the need to move hubs or re-align shafts, reducing element change - out time and plus, low initial cost, no-maintenance run time-with the use of long lasting lubricant. The success of the coupling principle is still one of the most popular today and is still the standard model for the larger industrial drives particularly for the steel industry.
"KBS" grid coupling comprises mainly two hubs, grids and covers. The grid is free to rock, pivot and float within the hub teeth. |
| |
| "KBS" TYRE TYPE FLEXIBLE COUPLING |
| |
"KBS" TYRE Coupling is a very elastic coupling
with flange material of C- 45 and TYRE of natural
rubber.
This coupling is practically maintenance free, and compensate large Radial, axial and angular shafts offsets.
No need for coupling disassembly to inspect. |
 |
| |
| "KBS" PIN BUSH TYPE FLEXIBLE COUPLING |
| |
 |
"KBS" PIN BUSH Type coupling are used in general engineering applications for reliable power transmission under normal shaft misalignments.
KBS PIN BUSH coupling comprises two hubs made of cast iron of High quality and available number of flexible elements, depending on the power to be transmitted. It also dampen shocks / vibrations as well as accepting misalignment that inevitably occurs between rotating shafts which are independently supported.
For special applications coupling with forged steel hubs available. |
KBS PIN BUSH coupling does not require lubrication. Rubber Bushes is of high quality and works as a safeguard against any bad effect of water, dust and atmospheric conditions. |
| |
| "KBS" HIGH TORQUE CURVED TOOTH GEAR COUPLING |
| |
|
"KBS" Gear couplings by its Comprehensive design and manufacturing capabilities have already proved to be of unrivalled reliability over many years.
This excellence has been achieved by keen attention to details in design and stringent quality Control. Continuous R&D being carried on to consolidate performance and improve reliability of KBS' Gear couplings.
"KBS" Gear couplings are available in following Executions such as
- Full gear type
- Half geared type
- Mill Motor Type
- Spacer type
- Brake Drum Type
- Gear with shear pin type
- Vertical Type
- Floating shaft type.
|
|
|
"KBS" Couplings consists of two identical hubs, two identical toothed flanged sleeves, gasket, bolts & nuts, "O" ring, seal carriers. The nomenclature of KBS Couplings are Forged hubs/forged/steel casting
sleeves/high tensile fitted bolts.
"KBS" recommended the coupling grease-Indian Oil-Servogem- EP1 or
equivalent. |
